Dan Goods Clothing Factory - Nanning

Everyone involved in foreign trade garment processing industry friends will know in the clothing production process will encounter many things that worry, there is hardly any list in the production process of a smooth, not today this place What's wrong is that tomorrow, What's wrong places. With regard to this issue, I mentioned some of my views, hopes and sharing with everyone. On the order of the offer, will be material processes can not dwell on here, mainly to talk about production in the plant prone to some of the issues among. First: the production of samples, sample production is a very important process, but that the importance of working procedure of most manufacturers do not pay attention to it, if the factory had just received the sample list started when we pay attention to  

Show more

the future, in large goods in the production process many of the problems can be avoided. General plant technology section has a dedicated division to play board, samples, generally the procedure is the case, the customer provides some model, and some do not provide a model provided by the model after model to the sample audit division staff cut sew. No model is necessary to first hit the boards and then sew the original samples to confirm changes by the customer. However, in this process, there are a lot of work most of the factories do not pay attention to it, such as from the playing board to cut into the sewing process there are many issues needing attention, these staff members generally did not do a written record of the habits and requirements. Because a sample is completed sewing factories in operation and then handed over to customers to confirm there is often a period of time, and these staff members, after a period of time after the production to pay attention to some of the problems often forget about theThe results tend to occur after the commissioning of large goods could have been avoided a lot of problems affecting the quality, the impact is effective. Technical officers in the sample be sent off this list must be followed by a detailed process followed by finishing a good archive, I remember that there must be a written record, perhaps the staff would find records by doing too much trouble to cultivate the habit after the fact, improve work efficiency is a good method. 2nd: Large goods to the factory to be tested after the fabric shrinkage rate, have to do any kind of fabric needed to be washed by washing the clothes factory for shrinkage test, Ordinary clothing factory to do hot comfort shrinkage test. However, such a working procedure, there are many factories will be ignored, there are a lot of fabric in the sewing process of ironing and the size of because of lack of adverse. According to modify the model for fabric shrinkage, do not omit the troublesome because of the working procedure. No. 3: All fabric must be carried out before cutting fabric to relax, to relax a 12-hour general fabric, elastic fabric and strong above the 24 hours to relax. Ensure that large goods production size. Cutting must be confirmed before the unit consumption, After confirmation by the customer in order to open the CD. Fourth: teams and groups must do first before the commissioning of the first and, after confirmation size, workmanship meet the technical requirements before they can be the big goods production. In the first piece is best to use large cargo cutting good, so will find more problems. There are many factories in order to save time, often directly put into the case, what is an error on a large number of man-made changes a waste of time. Fifth: the production process must be done in all sectors have complete informationAnd the management of all departments must carefully read the process, techniques and samples do not match the local to the clients to confirm, under normal circumstances should be subject to process. I met a lot of plants do not look at the time of production processes, the rule of thumb, or samples of the production, leading to some fairly low-level mistakes, wasting a lot of manpower and resources. Sixth: The early set carton, big production out of finished goods as soon as possible after the necessary set plastic bags, cardboard boxes, etc., be sure to look at technology on the packaging requirements, packaging specifications must be suitableCan not be too large or smaller, these are not allowed. Tag must be made by individual responsibility and must not mistake the tag specifications, and sometimes a tag is often used in order to return a result of the wrong boxes, packaging is very important to a process, must be serious and responsible. In fact, a list of the delivery proceeds smoothly, there are a lot of things need to do a good job, the main point is a serious and responsible, and sometimes a little bit of sloppy management staff would bring great damage to the plant. Because of the time relationship between the, Today write so that if in future we have time and we are interested, I will own a number of other apparel industry, and we write the exchange of ideas. Personal opinion, there may be peers do not agree with, but also a sincere hope that we come up with better ideas.